Assignment 1: Currency



CS 1110: Introduction to Computing Using Python

Assignment 1:

Thinking about that trip overseas? If you can swing it, it is best to go when the
exchange rate is in your favor. When your dollars buy more in the foreign
currency, you can do more on your vacation. This is why it would be nice to have
a function that, given your current amount of cash in US dollars, tells you how
much your money is worth in another currency.
However, there is no set mathematical formula to compute this conversion. The
value of one currency with respect to another is constantly changing. In fact, in the
time that it takes you to read this paragraph, the exchange rate between the dollar
and the Euro has probably changed several times. How on Earth do we write a
program to handle something like that?
One solution is to make use of a web service. A web service is a program that, when you send it web requests, automatically
generates a web page with the information that you asked for. In our case, the web service will tell us the current exchange rate for
most of the major international currencies. Your job will be to use string-manipulation methods to read the web page and extract
the exact information we need. Full instructions are included below.
Learning Objectives
This assignment is designed to give you practice with the following skills:
How to write a self-contained module in Python
How to use string and object methods in Python
How to connect Python to a web service
How to read specifications and understand preconditions
How to use docstrings appropriately for specifications
How to follow the coding conventions for this course
How to thoroughly test a program
The functions we ask you to write in this assignment are relatively short and straightforward. The emphasis is testing and “good
practices”, not complicated computations. You will find the most recent lab very helpful in understanding this assignment.
Table of Contents
Authors: W. White, D. Yoon, Q. Jia, L. Lee, and S. Marschner.
Image Credit: Petr Kratochvil
Academic Integrity and Collaboration
Before You Get Started
The Currency Exchange Web Service
Iterative Development
Part A: Breaking up Strings
Part B: Processing a JSON String
Part C: Currency Query
Part D: Currency Exchange
Finishing the Assignment
Appendix: Connecting to Rate-Exchange Service

Before You Get Started
Read Carefully
These instructions may seem long, but that is because we have tried to give you all the information you need in one document.
Your chances of completing the assignment quickly will be increased by reading carefully and following all instructions. Many
requests for resubmission are caused not by issues with programming but simply by not following instructions.
Pay particular attention to the section on Iterative Development, as it contains important instructions for the remaining sections,
and we will not repeat these instructions for each section.
Start Early!
600 students trying to contact a web service at once will slow everybody down. Connecting to, and reading from, a web page is
not instantaneous. It will take several seconds for some of the functions you will write to complete their calculations. Furthermore,
if you wait until the last minute to test this assignment, you will be connecting to the same web page as everyone else in the class,
so things could slow down even more.
Grading Policy (Revise-and-Resubmit Cycle)
To ensure that everyone masters this assignment, we will use an iterative feedback process. If one of the objectives below is not
properly met, we will give you feedback and expect you to revise and resubmit. This process will continue until you are done. This
process should be finished by Sunday, September 24th; Once you finish you will receive a perfect score of 10. In our experience,
almost everyone is able to achieve a perfect score within two submissions.
In grading your code, we will focus on the following issues in order:
Correct function specifications and/or formatting
Adequate test cases
Correctness of the code (does it pass our test cases?)
Formatting is graded according to the course style guidelines, available on the course web page.
If your code fails one of the three tests above, we will notify you and ask you to resubmit. We stop checking once we find the first
few errors, so you should not assume that the errors we point out are the only errors present.
Until we have decided that you have mastered (e.g. 10/10) the assignment, your “grade” on CMS will be the number of revisions so
far. This allows us to keep track of your progress. Do not be alarmed if you see a “1” for the assignment at first! The assignment
will be considered completed when it passes all three steps outlined above.
Assignment Scope
Everything that you need to complete this assignment should have been covered by Lecture 6 (Specifications and Testing) in class.
In particular, you may not use if-statements anywhere in this assignment, as they are not necessary. Submissions containing ifstatements will be returned for you to revise. Similarly, students with prior programming experience should not try to use loops or
Getting Help
If you do not know where to start, if you do not understand testing, or if you are completely lost, please see someone immediately.
This can be the course instructor, a TA, or a consultant. Do not wait until the last minute, particularly since this is due just after a
weekend. A little in-person help can do wonders. See the staff page for more information.
12/21/2018 CS 1110: Assignment 1 3/12
The Currency Exchange Web Service
Before you do anything at all, you might want to play around with the currency
exchange web service. You do not need any Python to do this; just a web browser.
For this assignment, you will use a simulated currency exchange service that
never changes values. This is important for testing; if the answer is always
changing, it is hard to test that you are getting the right answers. The appendix
explains how you can make a few minor changes to get real-time currencyexchange results. However, we do not want you to submit such code for your
assignment; stick with the fixed, unchanging server.
To use the service, you employ special URLs that start with the following prefix:
This prefix is followed by a currency query. A currency query has three pieces of information in the following format (without
spaces; we have included spaces here solely for readability):
src=source & dst=target & q=amount
where source is a three-letter code for the original currency, target is a three-letter code for the new currency and amount is a float
value for the amount of money in the original. For example, if you want to know the value of 2.5 dollars (USD) in Euros (EUR),
the query is
The query is not enough by itself. To use it, you have to make it part of a web page URL. The full URL for this query is
Click on the link to see it in action.
You will note that the “web page” in your browser is just a single line in the following format:
{ “success” : true, “lhs” : “2.5 United States Dollars”, “rhs” : “2.0952375 Euros”, “error” : “” }
This is what is known as a JSON representation of the answer. JSON is a way of encoding complex data so that it can be sent over
the Internet. You will use what you know about string operations and methods to pull out the relevant data out of the JSON string.
You should try a few more currency queries to familiarize yourself with the service. Note that if you enter an invalid query (for
example, using a non-existent currency code like “AAA”), you will get the following response in error:
{“success”:false, “lhs”:””, “rhs”:””, “error”:”Source currency code is invalid.” }
Similarly, if you enter a query with two valid currency codes, but with an invalid quantity value, you will get the following error:
{“success”:false, “lhs”:””, “rhs”:””, “error”:”Currency amount is invalid.” }
For all error queries, the “lhs” and “rhs” values are blank, while “success” is false. The value “error” is a specific error message
describing the problem. This will be important for error handling in this assignment.
Focus of the Assignment
Your primary goal in this assignment is to use the currency exchange service to write the following function:
def exchange(currency_from, currency_to, amount_from):
Returns: amount of currency received in the given exchange.
In this exchange, the user is changing amount_from money in currency
currency_from to the currency currency_to. The value returned represents the
amount in currency currency_to.
The value returned has type float.
Parameter currency_from: the currency on hand (the LHS)
Precondition: currency_from is a string for a valid currency code
Parameter currency_to: the currency to convert to (the RHS)
Precondition: currency_to is a string for a valid currency code
Parameter amount_from: amount of currency to convert
Precondition: amount_from is a float
12/21/2018 CS 1110: Assignment 1 4/12
This function will involve several steps. You will get the JSON string from the web service, break up the string to pull out the
numeric value (as a substring), and then convert that substring to a float. As this is the very first assignment, we are going to take
you through this process step-by-step. However, not every function that we ask you to implement will be used by exchange.
This assignment might feel like you are working in reverse. You will write the functions to break up the string first, and the
functions to interact with the web service last. This is because we want you to develop the following programming habit: always
complete and test the helper functions before finishing the functions that use them.
Currency Exchange Table
In order to make it easier to test your program, we have fixed the exchange rates in our web service. That way you can test the
answer in a web browser (using a currency query URL) and then compare the results to your Python program, without worrying
about rates fluctuating.
The following currencies are supported by our web service:
Code Name 1 USD = Code Name 1 USD =
AED United Arab Emirates
Dirham 3.672878 LBP Lebanese Pound 1508
AFN Afghan Afghani 68.3935 LKR Sri Lankan Rupee 152.610797
ALL Albanian Lek 111.63 LRD Liberian Dollar 116.871332
AMD Armenian Dram 478.16 LSL Lesotho Loti 12.926476
ANG Netherlands Antillean
Guilder 1.780104 LYD Libyan Dinar 1.360553
AOA Angolan Kwanza 165.9215 MAD Moroccan Dirham 9.34595
ARS Argentine Peso 17.265 MDL Moldovan Leu 17.699209
AUD Australian Dollar 1.25541 MGA Malagasy Ariary 2948.1
AWG Aruban Florin 1.794996 MKD Macedonian Denar 51.61
AZN Azerbaijani Manat 1.7 MMK Myanma Kyat 1358.05
BAM Bosnia-Herzegovina
Convertible Mark 1.63925 MNT Mongolian Tugrik 2433.43053
BBD Barbadian Dollar 2 MOP Macanese Pataca 8.059501
BDT Bangladeshi Taka 81.498388 MRO Mauritanian Ouguiya 365.04065
BGN Bulgarian Lev 1.639493 MUR Mauritian Rupee 32.887
BHD Bahraini Dinar 0.377064 MVR Maldivian Rufiyaa 15.404937
BIF Burundian Franc 1743.05 MWK Malawian Kwacha 725.605
BMD Bermudan Dollar 1 MXN Mexican Peso 17.8686
BND Brunei Dollar 1.352488 MYR Malaysian Ringgit 4.228868
BOB Bolivian Boliviano 6.975127 MZN Mozambican Metical 61.43
BRL Brazilian Real 3.113905 NAD Namibian Dollar 12.91
BSD Bahamian Dollar 1 NGN Nigerian Naira 359.066229
BTC Bitcoin 0.00021745803 NIO Nicaraguan Córdoba 30.008984
BTN Bhutanese Ngultrum 64.106522 NOK Norwegian Krone 7.778974
BWP Botswanan Pula 10.070807 NPR Nepalese Rupee 102.553085
BZD Belize Dollar 2.015882 NZD New Zealand Dollar 1.38733
CAD Canadian Dollar 1.240735 OMR Omani Rial 0.384992
CDF Congolese Franc 1562.881563 PAB Panamanian Balboa 1
CHF Swiss Franc 0.955688 PEN Peruvian Nuevo Sol 3.238015
CLF Chilean Unidad de
Fomento 0.02311 PGK Papua New Guinean
Kina 3.194708
CLP Chilean Peso 621.715 PHP Philippine Peso 51.095
CNY Chinese Yuan 6.52615 PKR Pakistani Rupee 105.19
COP Colombian Peso 2926.1 PLN Polish Zloty 3.55689
CRC Costa Rican Colón 576.836761 PYG Paraguayan Guarani 5656.15
CUC Cuban Convertible Peso 1 QAR Qatari Rial 3.689998
CUP Cuban Peso 25.5 RON Romanian Leu 3.853287
CVE Cape Verdean Escudo 92.9 RSD Serbian Dinar 100.200167
CZK Czech Republic Koruna 21.884838 RUB Russian Ruble 57.5206
DJF Djiboutian Franc 178.77 RWF Rwandan Franc 830.084566
DKK Danish Krone 6.234868 SAR Saudi Riyal 3.7506
DOP Dominican Peso 47.180379 SBD Solomon Islands Dollar 7.725799
12/21/2018 CS 1110: Assignment 1 5/12
Code Name 1 USD = Code Name 1 USD =
DZD Algerian Dinar 110.94 SCR Seychellois Rupee 13.646594
EGP Egyptian Pound 17.645 SDG Sudanese Pound 6.677259
ERN Eritrean Nakfa 15.333155 SEK Swedish Krona 7.963411
ETB Ethiopian Birr 23.415537 SGD Singapore Dollar 1.3524
EUR Euro 0.838095 SHP Saint Helena Pound 0.766307
FJD Fijian Dollar 2.008905 SLL Sierra Leonean Leone 7537.33542
FKP Falkland Islands Pound 0.766307 SOS Somali Shilling 579.49334
GBP British Pound Sterling 0.766307 SRD Surinamese Dollar 7.438
GEL Georgian Lari 2.482075 STD São Tomé and Príncipe
Dobra 20565.521652
GGP Guernsey Pound 0.766307 SVC Salvadoran Colón 8.750313
GHS Ghanaian Cedi 4.41291 SYP Syrian Pound 515
GIP Gibraltar Pound 0.766307 SZL Swazi Lilangeni 12.905459
GMD Gambian Dalasi 46.075 THB Thai Baht 33.148
GNF Guinean Franc 8968.85 TJS Tajikistani Somoni 8.810921
GTQ Guatemalan Quetzal 7.298907 TMT Turkmenistani Manat 3.50998
GYD Guyanaese Dollar 207.79838 TND Tunisian Dinar 2.425088
HKD Hong Kong Dollar 7.82541 TOP Tongan Paʻanga 2.201704
HNL Honduran Lempira 23.391297 TRY Turkish Lira 3.439969
HRK Croatian Kuna 6.224506 TTD Trinidad and Tobago
Dollar 6.730511
HTG Haitian Gourde 63.021504 TWD New Taiwan Dollar 30.07725
HUF Hungarian Forint 256.667 TZS Tanzanian Shilling 2239.4
IDR Indonesian Rupiah 13332.915894 UAH Ukrainian Hryvnia 25.992936
ILS Israeli New Sheqel 3.56023 UGX Ugandan Shilling 3618.908069
IMP Manx pound 0.766307 USD United States Dollar 1
INR Indian Rupee 64.075 UYU Uruguayan Peso 28.764997
IQD Iraqi Dinar 1169.000369 UZS Uzbekistan Som 8100.55
IRR Iranian Rial 33225.5 VEF Venezuelan Bolívar
Fuerte 10.09029
ISK Icelandic Króna 106.210839 VND Vietnamese Dong 22732.614564
JEP Jersey Pound 0.766307 VUV Vanuatu Vatu 103.774063
JMD Jamaican Dollar 128.871658 WST Samoan Tala 2.492203
JOD Jordanian Dinar 0.709001 XAF CFA Franc (BEAC) 549.754252
JPY Japanese Yen 108.85857545 XAG Troy Ounce of Silver 0.05568549
KES Kenyan Shilling 103.236159 XAU Troy Ounce of Gold 0.0007466
KGS Kyrgystani Som 68.494341 XCD East Caribbean Dollar 2.70255
KHR Cambodian Riel 4047.1 XDR Special Drawing Rights 0.705231
KMF Comorian Franc 413.45 XOF CFA Franc (BCEAO) 549.754252
KPW North Korean Won 900 XPD Troy Ounce of
Palladium 0.00103738
KRW South Korean Won 1132.9975 XPF CFP Franc 100.011331
KWD Kuwaiti Dinar 0.301493 XPT Troy Ounce of Platinum 0.00098665
KYD Cayman Islands Dollar 0.833299 YER Yemeni Rial 250.48907
KZT Kazakhstani Tenge 341.47 ZAR South African Rand 12.9032
LAK Laotian Kip 8289.75 ZMW Zambian Kwacha 9.125
LBP Lebanese Pound 1508 ZWL Zimbabwean Dollar 322.355011
Note however, that you should not use this table in any of the functions that you write in The table above is for testing
your functions; not for writing them. There is no reason for you to waste your time hard-coding in all of the currencies listed in this
table into your program, since the web service you will contact already knows them all anyway.
Iterative Development (How to Work Through the Assignment)
One of the most important outcomes of this assignment is that you understand the importance of testing. This assignment will
follow an iterative development cycle. That means you will write a few functions, then fully test them before you write any more.
This process makes it easier to find bugs; you know that any bugs must have been part of the work you did since the last test.
12/21/2018 CS 1110: Assignment 1 6/12
In this section we help you get started with this process. We also provide an overview of the rest of the assignment.
Setting up Python
To do this assignment, Python must be set up properly. If you have not already done this, follow the installation instructions to set it
up on your computer. Alternatively, you can just work in the ACCEL lab.
You should also create a folder on your hard drive that is dedicated to this assignment and this assignment only. Every time that
you work on a new assignment, we want you to make a new folder, to keep things organized and avoid problems with naming
collisions. Make sure that the command shell and Komodo Edit are both open in the current folder before you start.
The Module a1
In your newly created directory, you should create the module a1 (with file name This will be the main module for this
assignment. Following the style guidelines your file should start with a descriptive docstring, and the last two lines should be (1)
the name and netid of the authors and (2) the date the file was last editted. This is the docstring that we would like you to use:
Module for currency exchange
This module provides several string parsing functions to implement a
simple currency exchange routine using an online currency service.
The primary function in this module is exchange.
Cut-and-paste this docstring into a1, making sure to insert your name and date as appropriate.
The Module a1test
Iterative development hinges on proper unit testing, which was covered in lecture and lab. In the same folder as, create the
module a1test (with file name This will be the unit test for the a1 module.
As with, this file should start with a docstring specification that includes (1) your name and netid and (2) the date the file
was last editted. This is the docstring that we would like you to use:
Unit test for module a1
When run as a script, this module invokes several procedures that
test the various functions in the module a1.
You will get experience writing your own docstrings in a later assignment. After this docstring, add the following two lines.
import cornell
import a1
Finally four procedure stubs to the file testA, testB, testC, and testD. Remember that a procedure stub should
have the keyword pass (indented) after the header, but nothing else. For example, here is the code for the first one.
def testA():
“””Test procedure for Part A”””
We will add our test cases to these procedures later.
These procedures will eventually contain your unit tests, which we talked about in Lecture 6. If you are curious about how they are
supposed to work, look at the example in that lecture.
Finally at the end of a1test, you will need to add code to active the test procedures. Add these lines:
print(“Module a1 passed all tests”)
12/21/2018 CS 1110: Assignment 1 7/12
Again, see the lecture slides for an explanation of why you are doing this. The script code will call your four test procedures, which
are (currently) empty. If everything is working, then the module will print out the message
“Module a1 passed all tests”
Try this out.
Instructions for the Remainder of the Assignment
The rest of the assignment is broken into four parts (listed as Parts A, B, C, and D). In each part, do the following:
Write a function header into a1
We will give you the header to write. We will also give you a detailed docstring specification for the function. You should copyand-paste the specification into the function body, indented.
Add test cases to a1test
Yes, this means you are writing tests before writing the function bodies. We talked about this in lecture.
Unless otherwise instructed, each test case should be a call to an assert function in the cornell module. Furthermore, your tests
should be representative. While we talked about this in class, you might be a little unsure of what we are asking for here. If so, you
might want to work on the optional exercises in lab 4 with a consultant before going any further.
Write the function bodies
Make sure that the function satisifies the specifications exactly. If the specification says to return something, you need a return
statement. Make sure that the value returned is of the correct type.
Run the unit test a1test
If errors are found, fix them and re-test. Keep doing this until no more errors are found.
Writing Function Specifications
The descriptions that we provide in each part below represent the level of completeness and precision we are looking for in your
docstring comments. In fact, it is best to copy-and-paste these descriptions to create the first draft of your docstring comments. If
you do not cut and paste, please adhere to the conventions we use, such as using a single line, followed by a blank line and a more
descriptive paragraph, or by using “Returns: …” for fruitful-functions. Using a consistent set of good conventions in this class will
help us all.
If you want to see if your specifications are written correctly, start an interactive Python shell and type
>>> import a1
>>> help(a1)
This should list all the functions with their specifications.
Part A: Breaking Up Strings
A large part of this assignment is breaking up a JSON string. Conceptuually, you want to separate the currency amount from the
currency name. For example, if we are given the string
“0.838095 Euros”
Then we want to break it up into “0.838095” and “Euros”.
This is the motivation for the two functions below. The implementation of these functions should be relatively simple. We were
able to implement them both in one or two lines.
Returns: Substring of s; up to, but not including, the first space
Parameter s: the string to slice
Precondition: s has at least one space in it
12/21/2018 CS 1110: Assignment 1 8/12
Returns: Substring of s after the first space
Parameter s: the string to slice
Precondition: s has at least one space in it
Implement these functions according to their specification, as described in the Instructions for the Remainder of the Assignment. In
other words,
Write the header and specification in
Place test cases in the procedure testA() of
Implement the functions in
Test for and correct errors until no errors remain.
To test the functions, you should make use of assert_equals in the module cornell to compare the result of each functions
with the string that you expect to get back. Our solution has four test cases for each of the two functions above. When you think
about what test cases you want to include, consider the following:
Does the specification allow for strings with more than one space?
Does it allow for strings that start with a space?
Does it allow for strings that don’t have any spaces?
Finally, do not forget to add a specification to testA(). Just because it is used for testing does not mean that it should not be
properly specified.
Part B: Processing a JSON String
All of the responses to a currency query, whether valid or invalid, contain the keywords “lhs” and “rhs”. If it is a valid currency
query, then the answer is in quotes after the keyword “rhs”. If it is invalid, then the quotes after “rhs” are empty. Hence the next
step is to extract the information in quotes after these keywords.
While working on each of the functions below, remember to write the test cases in before implementing the body. All
test cases in this section go in the procedure testB(), which you should remember to specify. You should thoroughly test each
function before implementing the next one.
Returns: The first substring of s between two (double) quote characters
A quote character is one that is inside a string, not one that delimits it. We typically use single quotes (‘) to delimit a string if want
to use a double quote character (“) inside of it.
Example: If s is ‘A “B C” D’, this function returns ‘B C’
Example: If s is ‘A “B C” D “E F” G’, this function still returns ‘B C’ because it only picks the first such substring.
Parameter s: a string to search
Precondition: s is a string with at least two (double) quote characters inside.
You should have completed the function above in lab 3. Because this function is technically part of the lab, and not the assignment,
you may talk to students other than your partner about it (collaboration is always allowed on labs). This is the only function for
which this is allowed. The rest of the functions are part of the assignment, so you may only collaborate with your partner.
Once you have this function completed, you should move on to the following functions.
Returns: The the LHS value in the response to a currency query.
Given a JSON response to a currency query, this returns the string inside double quotes (“) immediately following the keyword
“lhs”. For example, if the JSON is
‘{“success”:true, “lhs”:”2 United States Dollars”, “rhs”:”1.825936 Euros”, “error”:””}’
then this function returns ‘2 United States Dollars’ (not ‘”2 United States Dollars”‘). It returns the empty string if the
JSON is the result of on invalid query.
12/21/2018 CS 1110: Assignment 1 9/12
Parameter json: a json string to parse
Precondition: json is the response to a currency query
Returns: The RHS value in the response to a currency query.
Given a JSON response to a currency query, this returns the string inside double quotes (“) immediately following the keyword
“rhs”. For example, if the JSON is
‘{“success”:true, “lhs”:”2 United States Dollars”, “rhs”:”1.825936 Euros”, “error”:””}’
then this function returns ‘1.825936 Euros’ (not ‘”1.825936 Euros”‘). It returns the empty string if the JSON is the result of on
invalid query.
Parameter json: a json string to parse
Precondition: json is the response to a currency query
Returns: True if the query has an error; False otherwise.
Given a JSON response to a currency query, this returns the opposite of the value following the keyword “success”. For
example, if the JSON is
‘{“success”:false, “lhs”:””, “rhs”:””, “error”:”Source currency code is invalid.”}’
then the query is not valid, so this function returns True (It does NOT return the message ‘Source currency code is
Parameter json: a json string to parse
Precondition: json is the response to a currency query
As always, write your unit tests before implementing the two functions. Look carefully at the specifications. You only need to test
valid JSON queries. To get some JSON responses for testing, enter a query URL into the web service and copy the result into a test
You should not need a conditional statement to implement these functions; simply find the position of the appropriate keyword and
extract the value in quotes immediately after it. Your implementation must make use of the find() or index() string methods, plus
the helper function first_inside_quotes().
Part C: Currency Query
Now it is time to interact with the web service. In this part, you will implement a single function. The test cases for this function
should go in procedure testC() in Do not forget to specify testC() properly.
def currency_response(currency_from, currency_to, amount_from):
Returns: a JSON string that is a response to a currency query.
A currency query converts amount_from money in currency currency_from
to the currency currency_to. The response should be a string of the form
‘{“success”:true, “lhs”:”<old-amt>”, “rhs”:”<new-amt>”, “error”:””}’
where the values old-amount and new-amount contain the value and name for the
original and new currencies. If the query is invalid, both old-amount and
new-amount will be empty, while “success” will be followed by the value false.
Parameter currency_from: the currency on hand (the LHS)
Precondition: currency_from is a string
Parameter currency_to: the currency to convert to (the RHS)
Precondition: currency_to is a string
Parameter amount_from: amount of currency to convert
12/21/2018 CS 1110: Assignment 1 10/12
Precondition: amount_from is a float
While this function sounds complicated, it is not as bad as you think it is. There is a function inside of the cornell module called
urlread. This function takes a single web address as an argument, and returns the contents of the web page. Try this now in the
interactive shell by typing
>>> import cornell
>>> cornell.urlread(‘’)
You will notice that this function does exactly what you want. So what is the challenge? The challenge is coming up with the
correct web address. Revisit our explanation of how the currency service works to see why this is a potential challenge.
You need to ensure that the function returns exactly the right JSON string for the value given. The best way to test this is to use a
web browser to manually get the right JSON answer. For example, one test case can be constructed by seeing the result of going to
the URL
Copy the value from this web page into a test case in testC(). Then check that the function returns the same JSON string.
Remember to be thorough with your choice of test cases; one is not enough.
Important: Fetching a web page takes time, especially if too many people are trying to do so simultaneously. You should give each
call to this function at least 5-10 seconds to complete before restarting any tests.
Part D: Currency Exchange
We are now ready for the final part of the assignment. Implement the following specifications, again using our test-case-beforefunction-body approach. The test cases should go in procedure testD() in a1test, which you should properly specify. You may
wish to use assert_true() instead of assert_equals() in some of your test cases. There is also a case in which you will
want to use assert_floats_equal(). If you are confused by this, you can get help by working through the optional exercises
in lab 4 with a consultant.
def iscurrency(currency):
Returns: True if currency is a valid (3 letter code for a) currency.
It returns False otherwise.
Parameter currency: the currency code to verify
Precondition: currency is a string.
In implementing iscurrency(), you should not use the table of currencies. That would make a very large function with a lot of
if-statements. You are not allowed if-statements in this lab. Instead, you must use the functions currency_response and
has_error as helper functions.
def exchange(currency_from, currency_to, amount_from):
Returns: amount of currency received in the given exchange.
In this exchange, the user is changing amount_from money in currency
currency_from to the currency currency_to. The value returned represents the
amount in currency currency_to.
The value returned has type float.
Parameter currency_from: the currency on hand (the LHS)
Precondition: currency_from is a string for a valid currency code
Parameter currency_to: the currency to convert to (the RHS)
Precondition: currency_to is a string for a valid currency code
Parameter amount_from: amount of currency to convert
Precondition: amount_from is a float
12/21/2018 CS 1110: Assignment 1 11/12
In the case of iscurrency(), you will find the exchange table useful in determining correct answers for your test cases. While it
is not okay to use the table in the body of iscurrency() itself, it is okay to use the table to to decide on some test cases.
You may also use the table to craft some test cases for the function exchange. However, you might find it easier to use a currency
query URL to look up the correct answer, and then paste the answer into your test case.
A bigger issue with testing exchange is that problem that we saw in class: real numbers cannot be represented exactly. This
creates problems when you try to test equality between floats. To solve this problem, cornell provides a function called
assert_floats_equal(). You should use this function to test exchange() instead of assert_equals(). There is an
example of this in the optional exercises of lab 4.
Finally, bear in mind that, like currency_response, these functions connect to the web service, and so are not instantaneous. In
our solution, with complete test procedures for everything, it can take up to 2 seconds to run the unit test on campus. This will be a
bit slower if you are working closer to the deadline.
Finishing the Assignment
Once you have everything working you should go back and make sure that your program meets the class coding conventions,
including the following:
You have indented with spaces, not tabs (this is not an issue if using Komodo).
Functions are each separated by two blank lines.
Lines are short enough (~80 characters) that horizontal scrolling is not necessary.
The specifications for all of the functions are complete.
Function specifications are immediately after the function header and indented.
Your name(s) and netid(s) are in the comments at the top of the modules.
One of the things that you may have the biggest difficulty with is breaking up long lines. First, you may not be aware when your
lines are too long. There is an easy way to test. In Komodo Edit choose Edit > Preferences > Editor > Smart Edition. Select the
checkbox that says Draw the edge line column.
As for breaking up long lines, there are two solutions. First, Python allows you to “hit Return” within any expression inside of
parentheses. So if you are adding together several expressions together, like
a = ‘Hello ‘ + name + ‘, it is good to meet you’
you can break it up over several lines, using parentheses, as follows:
a = (‘Hello ‘ + name +
‘, it is good to meet you’)
Another solution is to use the backslash symbol \. Remember that this is the escape character for making special characters in
strings. It also has a special effect outside of a string. If you type this symbol, immediately followed by a return, then Python will
know to continue to the next line. So you can rewrite the addition above as
a = ‘Hello ‘ + name + \
‘, it is good to meet you’
Turning it In
Upload the files and to CMS by the due date: Sunday, September 17th at 11:59 pm. Do not submit any files
with the extension/suffix .pyc. It will help to set the preferences in your operating system so that extensions always appear.
Check the CMS daily until you get feedback from a grader. Make sure your CMS notifications for CS 1110 are set so that you are
sent an email when one of your grades is changed. To find the feedback, click on the Assignment 1 link in CMS. On the page you
are brought to, click on the red word “show” in the line “Grading Comments & Requests (show).” You can contact your grader if
you have questions about their feedback; you can see their netid in the place you can see their feedback.
Within 24 hours, do RRRRR: Read the feedback, Revise your program accordingly, Resubmit, and Request a Regrade using the
CMS. If you do not request a regrade, we have no simple way of knowing that you have resubmitted.
This whole process, starting from first submission on Sunday, September 17th, continues until you submit a solution that
demonstrates complete mastery; in some cases this may require multiple additional resubmits by you. You need to complete this
process within one week. You need to have submitted a final, correct version by Sunday, September 24th, which means you will
probably want to have re-submitted at least once before then.
In addition to turning in the assignment, we ask that you complete the new survey posted in CMS. These assignments are still
rather new(ish), and we would like some understanding of how long you spent on the assignment, your impression of the difficulty,
12/21/2018 CS 1110: Assignment 1 12/12
and what could be done to improve it.
Please try to complete the survey within a day of turning in this assignment. Remember that participation in surveys compromise
1% of your final grade. We also ask that you be honest in your answers.
Appendix: Getting Real-Time Exchange Rates
This section is not part of the assignment. It is optional. Furthermore, do not make the changes in this section to the file that you
submit for grading. It will be sent back to you to fix.
This assignment was first designed back in 2012, to take advantage of a service called iGoogle. iGoogle was a JSON service
provided by Google (hence the name) which supported simple Python programs. It was intended for any data that might be
changing often, such as currency exchange rates, weather data, or similar types of things. Unfortunately, Google discontinued the
service in November 2013, two months after we ran the assignment for a second time.
This meant that we could still simulate a fake currency exchange service, but we no longer had a real-world example to show off
the power of this assignment. Most replacements to iGoogle typically charge for their service (because they are used by currency
traders), and we could not justify the subscription cost for a single assignment.
Fortunately, there is a great service called Open Exchange Rates. This service still charges, but it is free if you only need a new
currency value once an hour. This is a pretty good compromise, because that is frequent enough for anyone who is not a currency
The data from Open Exchange Rates is not in a format usable by this assignment. However, it does allow your instructor to turn our
fake currency service into a real currency service. We are actually running two currency servers in this class. In the web service
instructions we told you to use the URL prefix
If you change that prefix to
you will get our real server instead. Try that out on converting dollars to Euros (pick small values for now).
The server updates once an hour at 30 minutes after the hour. To see this in action, run a query just before this time, at say 8:28.
Wait 5 minutes and run the same query again. See how it changes? This is one of the reasons we did not use the real service in
development; it is too hard to test against. In fact, even professional software engineers would do what we did: write a program
against an unchanging exchange service before deploying it against the real thing.
We promise to keep the real server running for at least the next year, should you wish to show this off to other people.


There are no reviews yet.

Be the first to review “Assignment 1: Currency”

Your email address will not be published.