Lab Assignment 4 Front-end to the database.


Rate this product

Lab Assignment 4 CMPS 180
1. Preliminaries
Under Resources→Lab4 on Piazza, there are some files that are discussed in this document. Two
of the files are lab4_ create.sql script and lab4_data_loading.sql. The lab4_ create.sql script
creates all tables within the schema Lab4. The schema is (almost) the same as the one we used for
Lab3; there is no NewCustomers table, but there is a view BuyerSellerTotalCost (described below),
and we also included referential integrity constraints. lab4_data_loading.sql will load data into
those tables, just as a similar file did for Lab3. Alter your search path so that you can work with
the tables without qualifying them with the schema name:
You must log out and log back in for this to take effect. To verify your search path, use:
Note: It is important that you do not change the names of the tables. Otherwise, your application
may not pass our tests, and you will not get any points for this assignment.
Lab Assignment 4 CMPS 180 – Winter 2019 Due: 11:59pm March 13, 2019
2. Instructions to compile and run JDBC code
Two important files under Resources→Lab4 are and You should also download the file postgresql-42.2.5.jar, which
contains a JDBC driver, from
Place those 3 files into your working directory. That directory should be on your Unix PATH, so
that you can execute files in it. Also, follow the instructions for “Setting up JDBC Driver,
including CLASSPATH” that are at
Modify with your own database credentials. Compile the Java
code, and ensure it runs correctly. It will not do anything useful with the database yet, except for
logging in and disconnecting, but it should execute without errors.
If you have changed your password for your database account with the “ALTER ROLE username
WITH PASSWORD <new_password>;” command in the past, and you are using a confidential
password (e.g. the same password as your Blue or Gold UCSC password, or your personal e-mail
password), make sure that you do not include this password in the
file that you submit to us, as that information will be unencrypted.
You can compile the program with the following command
(where the “>” character represents the Unix prompt):
> javac
To run the compiled file, issue the following command:
> java RunStockMarketApplication
Note that if you do not modify the username and password to match those of your PostgreSQL
account in your program, the execution will return an authentication error. (We will run your
program as ourselves, not as you, so we don’t need to include your password in your solution.)
If the program uses methods from the StockMarketApplication class and both programs are located
in the same folder, any changes that you make to can also be compiled
with a javac command similar to the one above.
You may get ClassNotFound exceptions if you attempt to run your programs locally and there is no
JDBC driver on the classpath, or unsuitable driver errors if you already have a different version of
JDBC locally that is incompatible with, which is the class DB server. To
avoid such complications, we advise that you use the provided postgresql-42.2.5.jar file, which
contains a compatible JDBC library.
Note that Resources→Lab4 also contain a file from an old CMPS 180
assignment; it won’t be used in this assignment, but it may help you understand it, as we explain in
Section 6.
3. Goal
The fourth lab project puts the database you have created to practical use. You will implement part
of an application front-end to the database. As good programming practice, all of your methods
should catch erroneous parameters, such as a value for numDifferentStocksSold that’s not positive
in getCustomersWhoSoldManyStocks, and a value for theCount in rewardBestBuyers that’s not
positive, and print out appropriate error messages.
4. Description of methods in the StockMarketApplication class contains a skeleton for the StockMarketApplication class, which has
methods that interact with the database using JDBC.
The methods in the StockMarketApplication class are the following:
• getCustomersWhoSoldManyStocks: This method has an integer argument called
numDifferentStocksSold, and returns the customerID for each customer in Customers that
has been the seller of at least numDifferentStocksSold different stocks in Trades. A value
for numDifferentStocksSold that’s not greater than 0 is an error.
• updateQuotesForBrexit: Quotes give information about stock prices. Brexit, the British
exit from the European Union, may make a stock exchange that had expressed Quotes in
euros to switch to British pounds instead. A euro is worth about 0.87, so exchanges will
have to multiple prices in quotes by 0.87 to handle the conversion.
The updateQuotesForBrexit method has one string argument, theExchangeID, which is the
exchangeID for an exchange. (You don’t have to test to see if there’s an exchange in
Exchanges which has that exchangeID.) updateQuotesForBrexit should update price in
Quotes for every quote that has that exchangedID, multiplying price by 0.87.
updateQuotesForBrexit should return the number of quotes whose prices were updated.
• rewardBestBuyers: This method has two integer parameters, theSellerID and theCount. It
invokes a stored function rewardBuyersFunction that you will need to implement and store
in the database according to the description in Section 5. rewardBuyersFunction should
have the same two parameters, theSellerID and theCount. Trades has a volume attribute.
rewardBuyersFunction will increase the volume for some trades whose sellerID is
theSellerID; Section 5 explains which trade volumes should be increased, and how much
they should be increased. The rewardBestBuyers method should return the same integer
result as the rewardBuyersFunction stored function.
The rewardBestBuyers method must only invoke the stored function
rewardBuyersFunction, which does all of the assignment work; do not implement the
rewardBestBuyers method using a bunch of SQL statements through JDBC. However,
rewardBestBuyers should check to see whether theCount is greater than 0, and report an
error if it’s not.
Lab Assignment 4 CMPS 180 – Winter 2019 Due: 11:59pm March 13, 2019
Each method is annotated with comments in the file with a
description indicating what it is supposed to do (repeating most of the descriptions above). Your
task is to implement methods that match the descriptions. The default constructor is already
For JDBC use with PostgreSQL, the following links should be helpful. Note in particular, that
you’ll get an error unless the location of the JDBC driver is in your CLASSPATH.
Brief guide to using JDBC with PostgreSQL:
Setting up JDBC Driver, including CLASSPATH:
Information about queries and updates:
Guide for defining stored procedures/functions:
Lab Assignment 4 CMPS 180 – Winter 2019 Due: 11:59pm March 13, 2019
5. Stored Function
As Section 4 mentioned, you should write a stored function called rewardBuyersFunction that has
two integer parameters, theSellerID and theCount. rewardBuyersFunction will increase the volume
of some of the trades whose sellerID is theSellerID. But you’ll only increase volume for at most
theCount different buyers. (Let’s hope that these buyers feel rewarded by this.)
The cost of a trade in Trades is price * volume. In lab4_create.sql, we provided a view,
BuyerSellerTotalCost(buyerID, sellerID, totalCost), that gives the total cost of all the trades that
took place for each buyer and seller. (Of course, if there were no trades between a buyer and seller,
there is no tuple for that buyer/seller in BuyerSellerTotalCosts.) You will probably find it helpful
to use that view in writing rewardBuyersFunction.
rewardBuyersFunction should increase the volume in Trades for some trades in which the seller
was theSellerID. category is an attribute of Customers.
• If the buyer is a high status customer (category ‘H’), then increase the volume by 50.
• If the buyer is a medium status customer (category ‘M’), then increase the volume by 20.
• If the buyer is a low status customer (category ‘L’), then increase the volume by 5.
• If the buyer has any other category, then increase the volume by 1.
However, you won’t increase the volume of every trade in Trades for which sellerID is theSellerID;
you’ll adjust trades that involve at most theCount different buyers.
Which trades in Trades should have volume increases? Answer: The volume should be increased
only for those buyers whose trades with theSeller had the highest totalCost (as shown in the view
BuyerSellerTotalCost). For example, if theCount is 3:
a) If there are tuples in BuyerSellerTotalCost for theSellerID with 3 or more different buyers,
then the volumes of all trades involving those 3 buyers with the highest totalCost should be
increased (with the volume increase based on the category of the buyer).
b) If there are tuples in BuyerSellerTotalCost for theSellerID with only 2 different buyers,
then the volumes of all trades involving those 2 buyers should be increased (with the
volume increase based on the category of the buyer).
c) If there are no tuples in BuyerSellerTotalCost for theSellerID with any buyers, then there
should be no volume increases.
The rewardBuyersFunction stored function should return the total number of trades for theSellerID
whose volumes were increased. Note that there might be many trades whose volumes are increased
even if theCount is 1.
If theCount is 3 and there are multiple buyers that have the third highest totalCost, then you may
increase the volume of any one of them. But you should never increase volumes for more than
theCount different buyers.
Lab Assignment 4 CMPS 180 – Winter 2019 Due: 11:59pm March 13, 2019
Write the code to create the stored function, and save it to a text file named
rewardBuyersFunction.pgsql. To create the stored function rewardBuyersFunction, issue the psql
\i rewardBuyersFunction.pgsql
at the server prompt. If the creation goes through successfully, then the server should respond with
the message “CREATE FUNCTION”. You will need to call the stored function within the
rewardBestBuyers method through JDBC, as described in the previous section. You should include
the rewardBuyersFunction.pgsql source file in the zip file of your submission, along with your
versions of the Java source files and
that were described in Section 4.
As we noted above, a guide for defining stored functions with PostgreSQL can be found here on the
PostgreSQL site. PostgreSQL stored functions have some syntactic differences from the PSM
stored procedures/functions that were described in class, and PostgreSQL. For Lab4, you should
write a stored function that has only IN parameters; that’s legal in both PSM and PostgreSQL.
We’ll give you some more hints on Piazza about writing PostgreSQL stored functions.
Lab Assignment 4 CMPS 180 – Winter 2019 Due: 11:59pm March 13, 2019
6. Testing
The file (this is not a typo) contains sample code on how to set up the
database connection and call application methods for a different database and for different
methods. is provided only for illustrative purposes, to give you an idea
of how to invoke the methods that you want to test in this assignment. It is not part of your Lab4
assignment, so it should not be submitted as part of your solution. is the program that you will need to modify in ways that are
similar to the content of the program, but for this assignment, not for a
Stores-related assignment. You should write tests to ensure that your methods work as expected. In
particular, you should:
• Write one test of the getCustomersWhoSoldManyStocks method with the
numDifferentStocksSold argument set to 3. Your code should print the result returned as
output. Remember that your method should run correctly for any value of
numDifferentStocksSold, not just when it’s 3.
You should also print a line describing your output in the Java code of
RunStockMarketApplication. The overall format should be as follows:
* Output of getCustomersWhoSoldManyStocks
* when the parameter numDifferentStocksSold is 3.
output here
• Write one test for the updateQuotesForBrexit method that updates prices quotes whose
exchangeID is ‘LSE ’. (which is six characters, including 3 spaces at the end). Print out
the result of updateQuotesForBrexit (that is the number of stocks whose price was updated)
in RunStockMarketApplication as follows:
*Output of updateQuotesForBrexit when theExchangeID is ‘LSE ’
output here
• Write two tests for the rewardBestBuyers method. The first test should have theCount
value 2 and theSellerID value 1456. The second test should have theCount value 4 and
theSellerID value 1456 (yes, the same value of theSellerID as in the first test). In
RunStockMarketApplication, your code should print the result (total number of trades
involving theSellerID whose volume was increased) returned by each of the two tests, with
a description of what each test was, just as for the previous methods.
Please be sure to run the tests in the specified order, running with theCount 2, and then with
theCount 4. The order affects your results.
Important: You must run all of these method tests in order, starting with the database provided by
our create and load scripts. Some of these methods change the database, so using the database
we’ve provided and executing methods in order might matter.
Lab Assignment 4 CMPS 180 – Winter 2019 Due: 11:59pm March 13, 2019
7. Submitting
1. Remember to add comments to your Java code so that the intent is clear.
2. Place the java programs and,
and the stored procedure declaration code rewardBuyersFunction.pgsql in your working
directory at Please remember to remove your password from before submitting.
3. Zip the files to a single file with name where XXXXXXX is your 7-
digit student ID, for example, if a student’s ID is 1234567, then the file that this student
submits for Lab4 should be named To create the zip file, you can use the
Unix command:
zip Lab4_1234567 rewardBuyersFunction.pgsql
4. Lab4 is due on Canvas by 11:59pm on Wednesday, March 13, 2019. Late submissions will
not be accepted, and there will be no make-up Lab assignments.


There are no reviews yet.

Be the first to review “Lab Assignment 4 Front-end to the database.”

Your email address will not be published. Required fields are marked *

Scroll to Top